Numerical and theoretical research on fluid transport and heat flow in porous/fractured media
Modeling of unconventional hydrocarbon reservoirs—oil shale, shale gas, methane hydrates, heavy oil, bitumen
Forward simulation and inverse modeling of diverse processes applied in subsurface energy systems—chemical/thermal enhanced recovery, in-situ upgrading, cyclic steam stimulation, hydraulic fracturing, CO2 sequestration, CO2 push-pull
Applications—economic production of unconventional resources, environmental effects of hydrocarbon production, control and protection of groundwater, enhanced geothermal systems
Selected Professional Activities/Honors:
Reagan, M.T. Moridis, G.J. Keen, N.D. Lee, K. et al. 2019. Transport and Fate of Natural Gas and Brine Escaping from a Hydrocarbon Reservoir Through a Failed Deepwater Well in the Oceanic Subsurface of the Gulf of Mexico. Transport in Porous Media. 127(2): 459-480.
Oldenburg, C. Daley, T. Borgia, A. Doughty, C. Jung, Y. Lee, K. Zhang, R. Altundas, B. Chugunov, N. 2018. On Carbon Dioxide Injection into Faults and Fracture Zones for Better Characterization of Permeable Flow Paths in Enhanced Geothermal Systems (LBNL Report).
Anyenya, G.A. Braun, R.J. Lee, K. et al. 2018. Design and Dispatch Optimization of a Solid-oxide Fuel Cell Assembly for Unconventional Oil and Gas Production. Optimization and Engineering. 19(4): 1037-1081.
Jung, Y. Doughty, C. Borgia, A. Lee, K. et al. 2018. Pressure Transient Analysis during CO2 Push-Pull Tests into Faults for EGS Characterization. Geothermics. 75: 180-191.
Lee, K. Finterle, S. and Moridis, G.J. 2018. Analyzing the Impact of Reaction Models on the Production of Hydrocarbons from Thermally Upgraded Oil Shales. Journal of Petroleum Science and Engineering. 168: 448-464.
Lee, K. Finterle, S. and Moridis, G.J. 2018. Estimating the Reaction Parameters of Oil Shale Pyrolysis and Oil Shale Grade Using Temperature Transient Analysis and Inverse Modeling. Journal of Petroleum Science and Engineering. 165: 765-776.
Lee, K. Oldenburg, C.M. Doughty, C. et al. 2018. Simulations of Carbon Dioxide Push-Pull into a Conjugate Fault System Modeled after Dixie Valley— Sensitivity Analysis of Significant Parameters and Uncertainty Prediction by Data-Worth Analysis. Geothermics. 74: 121-134.
Foxall, W. Doughty, C. Lee, K. Nakagawa, S. Daley, T. Burton, E. Layland-Bachmann, C. Borglin, S. Freeman, K. Ajo-Franklin, J. Jordan, P. Kneafsey, T. Oldenburg, C. and Ulrich, C. 2017. Investigation of Potential Induced Seismicity Related to Geologic Carbon Dioixide Sequestration in California. CEC-500-2017-028.
Lee, K. Moridis, G.J. and Ehlig-Economides, C.A. 2017. Numerical Simulation of Diverse Thermal In-situ Upgrading Processes for the Hydrocarbon Production from Kerogen in Oil Shale Reservoirs. Energy Exploration & Exploitation. 35(3): 315-337.
Lee, K. Moridis, G.J. and Ehlig-Economides, C.A. 2017. Compositional Simulation of Hydrocarbon Recovery from Oil Shale Reservoirs with Diverse Initial Saturations of Fluid Phases by Various Thermal Processes. Energy Exploration & Exploitation. 35(2): 172-193.
Lee, K. Moridis, G.J. and Ehlig-Economides, C.A. 2016. In-situ Upgrading of Oil Shale by Steamfrac in Multistage Transverse Fractured Horizontal Well System. Energy Sources Part A : Recovery, Utilization, and Environmental Effects.38(20): 3034-3041.
Lee, K. Moridis, G. J. and Ehlig-Economides, C. A. 2016. A Comprehensive Simulation Model of Kerogen Pyrolysis for the In-situ Upgrading of Oil Shales. SPE Journal. 21(05): 1612-1630.
Lee, K. Bahk, J. And Choe, J. 2015. Numerical Modeling for Temperature and Pressure Distributions in Gas Hydrate Bearing Sediments while Drilling. Energy Sources Part A : Recovery, Utilization, and Environmental Effects. 37(4): 372-383.
Khurshid, I. Lee, K. and Choe, J. 2013. Analyses of Thermal Disturbance in Drilling Deep and High Temperature Formations. Energy Sources Part A: Recovery, Utilization, and Environmental Effects. 35(16): 1487-1497.
Lee, K. and Choe, J. 2011. Numerical Modeling of the Effect of Seawater and Circulation Rates for Seafloor Mudline Temperature. Geosystem Engineering. 14(3): 153-156.
Ryu, J. Lee, K. Bahk, J. and Choe, J. 2010. Wellbore Stability Analysis for Hydrate Bearing Sediments using a Bonded Particle Model. The Korean Society for Geosystem Engineering (Korean). 47(2): 191-198.
Ph.D. Students: Lotanna Ohazuruike, Jiahui You
M.S. Student: Xinwei Xiong